Svenska Aerogel AB has developed the material Quartzene® which is of the typeprecipitated silica and contains calcium - magnesium silicate ((Ca, Mg) SiO3). Thematerial is used for molecular filtration of contaminated air. Qartzene?, which is inpellet form, is porous and has a high internal surface which is a requirement for themolecular filtration. With the use of various impregnations, filtration can affect thedesired outcome.

In Sweden more than 400 000 private households have not yet sufficient wastewater purification. These effluent is considered as an increasing problem and many onsite purification methods have been studied. In this investigation, the method of reactive bed filters have been tested by column and batch experiments. Five different kinds of filter materials with reactive surfaces have been studied concerning their capacity to absorb ammonium and phosphorus from wastewater. The materials that were examined are Filtra N, wollastonite Filtra P, blast furnace slag and Polonite®.

Four different kinds of filter-materials with reactive surfaces have been studied concerning their capacity to absorb heavy metals in leachate from a municipal waste deposit. The heavy metals studied were: lead, cadmium, copper, mercury, chromium, nickel and zinc. The leachate contains high levels of dissolved organic carbon (DOC) and has a high pH-value along with a high buffer capacity. These characteristics of the leachate make it difficult to remove pollutants and require efficient filters. The filters that were examined in the report are blast-furnace slag with CaO, sand covered with iron oxides, olivine and nepheline.

Svenska Aerogel AB has developed the material Quartzene® which is of the typeprecipitated silica and contains calcium - magnesium silicate ((Ca, Mg) SiO3). Thematerial is used for molecular filtration of contaminated air. Qartzene?, which is inpellet form, is porous and has a high internal surface which is a requirement for themolecular filtration. With the use of various impregnations, filtration can affect thedesired outcome.

Abstrakt The yield curve as a forecasting tool for inflation has been thoroughly investigated. However, most of these studies considered only the major economies, such as the U.S. economy or the major European economies and not a small open economy such as the Swedish. The Swedish economy should be much more affected by the world economy then the bigger economies. The purpose with this study is then to investigate whether the Swedish yield curve, or the Swedish interest rate, can be used as forecasting tools for the Swedish inflation.

The filters used today to purify water are often expensive and the need to find new filter materials is substantial. Studies of pine bark have shown that this is a material that may be used as an alternative to conventional filter materials, such as activated carbon. However, the study of pine bark has shown that a leakage of phenolic compounds may occur when using the material for water purification. Therefore, the purpose of this report is to investigate the release of phenols from pine bark, in order to evaluate the use of pine bark as a filter material. Another assignment is to investigate the amount of metals adsorbed by the filter material.

An excessive input of nutrients to lakes and other water bodies has created a problem with eutrophication in Sweden. Untreated, or partially treated, domestic sewage is a major source for discharge of phosphorus (P), which is the nutrient most frequently responsible for eutrophication of most fresh waters and the Baltic Sea. The waste water can be cleaned by filter materials, which have a high P-retention ability and which after saturation may be used as fertilizers. Four potentially suitable filter materials were tested in batch- and column experiments in this study. In the batch experiments, the following materials were shaken with waste water in time series ranging from 5 seconds to 60 minutes: coarse (1-4 mm) and fine (0-2 mm) Polonite® (heated bedrock from Poland); Filtralite® (light expanded clay aggregates with limestone added before burning); water cooled blast furnace slag (BF-slag) and BF-slag mixed with 10% burned limestone.

I detta examensarbete utvärderas väggreppsmätaren RT3 Curve som tillverkas av Halliday Technologies Inc. RT3 Curve kan liknas vid en liten släpvagn som kopplas bakom en bil. Den mäter friktionen mellan två ytor genom två mätdäck som är monterade med fasta slipvinklar. Den fordonsdynamiska termen slipvinkel är vinkeln mellan ett rullande hjuls färdriktning och den riktning som hjulet pekar i. Detta gör att sidkrafter uppstår när släpvagnen dras bakom bilen.

According to the theory of environmental Kuznets curve there is a relationship between carbon emissions and GDP. The relationship has an inverted U-shape. Carbon emissions rise initially and then decreases once a certain level of GDP is obtained.This essay interprets earlier studies in the field of environmental economics and uses public choice to seek answer on how the population acts on aggregate level. This essay analyses 115 countries in cross-sectional data. The analysis shows that there is a significant relationship between carbon dioxide emissions and GDP that is increasing at first and then decreases for a certain level of GDP.

Today automatic milking systems (AMS) are growing in popularity. In these systems the cows are loose and have to get to the robot and the feed on their own. The cows ranking in this system affect their welfare. In this study data from seven years in an AMS was used and analysed. The aim was to investigate how ranking could affect the behaviour of the cows at milking and at feeding.

A study of how pseudoscience is used in modern science as a method for dividing people into groups depending on their extraction with focus on the book The Bell Curve written by Charles Murray and Richard J. Herrstein..

In this thesis a possible cost effective runner change of some of the units in the hydroelectric power station Olidan is investigated. The possibility to drive a unit at the same efficiency point through a change of the turbine shaft speed and the rate of discharge is tested. Furthermore the theories behind model testing, determination of efficiency increase from model to prototype and efficiency measurements shall be discussed and analyzed with Olidan as a starting point.A predicted curve has been built on information from model tests and field measurements on the existing runners and runner data from the test of the new model. The predicted curve shows the difference in efficiency between an existing runner and a modern one. It is the difference in efficiency that is used in the calculations that are to show whether changing to a pair of new runners will be cost effective or not.

In conventional viscose manufacturing, a large amount of carbondisulfide is consumed. This amount has to be decreased to keep the production cost down and to reduce the environmental impact. The purpose with this work was to show if an enzyme treatment of a dissolving pulp could increase the degree of substitution in the viscose so that the amount of carbon disulfide consumed in the process could be decreased. Previous investigations by Kvarnlöf (2007), Engström et.al. (2006) and Henriksson et.al.

The relationship between free trade and the environment is often considered conflicting and the debates surrounding it are infected. My thesis deal with this conflict and how environmental concerns are integrated in three regional free trade agreements, North American Free Trade Agreement, The common market of the southern cone (MERCOSUR) and Southern African Development Community (SADC). I point out how the organizations differ from each other in this respect and I present a possible explanation to why they differ. The explanation is founded on the theory of the environmental Kuznets curve and that environmental concerns will depend on which level of development the member states in the organizations have. To judge and rank the organizations I have composed a model based on a pre-existing description of the trade and environment conflict.

The acoustics in a control room is a complicated phenomenon. Early reflections, reverberation time and area in the room are some of the problems. This report is about the reflection on the mixing console in a control room. The control room being built, these reflections are difficult to take into consideration since the mixing console is one of the very last items you place in the room. This report will explain three main measurements that were done in order to get the answer to the following question: Does the mixing console interfere the frequency curve at listening position? Three measurements were done and the difference between the measurements was that the microphone and the loudspeakers were placed in different places in the control room.